The headline number is a maximum groove depth
Article 49.02 of the 2026 FIM technical rules says the rear tyre must have a tread groove no deeper than 13mm. The measurement runs from the minimum point of the groove to a line tangent with the sidewall. It is a defined technical-control measurement, not a casual estimate of knob height.
The tyre must be a real retail product
Only tyres normally available through commercial or retail sources are authorised. They must appear in a manufacturer catalogue or specification list available to the public. The rule therefore connects eligibility to an identifiable production tyre rather than a one-off competition-only pattern.
Road-style approval marks remain part of Enduro eligibility
Enduro tyres must comply with UN Vehicle Regulation 75 and carry its E approval mark and number on both sidewalls; the FIM also accepts a DOT approval mark. The minimum published ratings are speed symbol M, equivalent to 130km/h, and load index 45, equivalent to 165kg.
Post-production performance changes are prohibited
The general tyre rule does not allow chemical treatment, cutting or grooving, tyre warmers or any other method that can alter shape, minimum Shore hardness, construction or other characteristics. Choosing a compliant tyre and changing it after manufacture are therefore treated as separate questions.
Special terrain does not create a blanket exception
Studded tyres may be allowed only when the event’s Supplementary Rules provide for them and the Clerk of the Course or FIM Race Director approves their use for the course conditions. They must still be commercially available and comply with national law. Scoop or paddle tyres with a continuous radial rib are prohibited. Riders should also check the Supplementary Rules because tyre permissions differ between 6DAYS, EnduroGP, SuperEnduro and HardEnduro events.
Facts are frozen to the verification date shown above. Any later correction will be added visibly.
Primary source checked internally: FIM official 2026 6DAYS, EnduroGP, SuperEnduro and HardEnduro Technical Rules, articles 47.01 and 49.01–49.05; checked 12 November 2026.




