Technical control fixes four parts to one competition motorcycle
At preliminary examination, FIM officials identify the frame’s main section, both wheel hubs and the silencer. The frame is marked at the right-hand steering head, each hub receives a mark and the silencer is marked on top. Although the regulation lists three component groups, the two hubs make four individual marked parts.
The marks must survive the event
The identified parts must be used throughout the competition and remain in their proper place at final examination. Paint on the hubs and silencer must be heat resistant. Officials may use paint, a non-removable destructible sticker or a seal; the rule specifically forbids a marker pen.
An unauthorised swap brings the strongest sporting penalty
Substituting an original marked component or disregarding the marking rule is strictly forbidden. Article 62.22.1 sets disqualification as the penalty. The system protects the identity of the motorcycle without preventing the ordinary maintenance that the wider regulations allow at the correct time and place.
A missing mark triggers a second check, not guesswork
If a mark is missing or officials have doubts, they apply a different-colour mark or another non-removable sticker. At the final control of the day, the FIM Technical Director examines the motorcycle and reports the action to Race Direction. The extra mark records the issue for a formal decision.
The restart procedure has one narrow reset
When a retired rider is admitted to the official restart procedure, only the originally marked frame must remain. That exception applies to the regulated restart process; it does not create a general permission to exchange marked parts during normal competition.
This explains the rule without borrowing race imagery
Euro MX Community checked the current FIM Enduro World Championship Regulations on 20 November 2026. This evergreen briefing records the published control procedure and penalty only. Its accompanying visual is an original branded text-card, not a technical-control or race photograph copied from another source.
Facts are frozen to the verification date shown above. Any later correction will be added visibly.
Primary source checked internally: FIM official 2026 Enduro World Championship Regulations, articles 62.22.1–62.23.1, update 23 January 2026; checked 20 November 2026.




