Release the grip and the throttle must close
Article 01.37.01 of the current FIM Motocross Technical Regulations requires the throttle control to be self-closing when it is not held by the rider. The rule makes the return action a mandatory safety function rather than an optional setup choice.
Combustion motorcycles retain a direct cable
For a combustion motorcycle, both opening and closing must be activated by a mechanical cable running from the twist grip directly to the throttle valve. The same article prohibits electronically controlled throttle valves.
Electric motorcycles receive the narrow exception
The rule expressly allows a ride-by-wire system only for electric motorcycles. It does not create a general permission for electronic throttles across MXGP, MX2 or other combustion-powered motocross classes.
The intake route is controlled too
All air entering the cylinder must pass through the throttle body. The regulation prohibits another route that would let ambient air enter the inlet tract of the cylinder head, keeping the permitted control architecture clearly defined.
This explains the rule without claiming a performance effect
The official text defines the required hardware and the electric exception. It does not say that one system is faster, easier to ride or more reliable, so this briefing makes no performance claim.
Facts are frozen to the verification date shown above. Any later correction will be added visibly.
Primary source checked internally: FIM official Motocross Technical Regulations, version 1 August 2026, article 01.37.01; checked 19 November 2026.




