FACT-CHECKEDWritten in-house from a primary official source. No copied article and no outbound detour.

Release the grip and the throttle must close

Article 01.37.01 of the current FIM Motocross Technical Regulations requires the throttle control to be self-closing when it is not held by the rider. The rule makes the return action a mandatory safety function rather than an optional setup choice.

Combustion motorcycles retain a direct cable

For a combustion motorcycle, both opening and closing must be activated by a mechanical cable running from the twist grip directly to the throttle valve. The same article prohibits electronically controlled throttle valves.

Electric motorcycles receive the narrow exception

The rule expressly allows a ride-by-wire system only for electric motorcycles. It does not create a general permission for electronic throttles across MXGP, MX2 or other combustion-powered motocross classes.

The intake route is controlled too

All air entering the cylinder must pass through the throttle body. The regulation prohibits another route that would let ambient air enter the inlet tract of the cylinder head, keeping the permitted control architecture clearly defined.

This explains the rule without claiming a performance effect

The official text defines the required hardware and the electric exception. It does not say that one system is faster, easier to ride or more reliable, so this briefing makes no performance claim.

Editorial note
Facts are frozen to the verification date shown above. Any later correction will be added visibly.
Primary source checked internally: FIM official Motocross Technical Regulations, version 1 August 2026, article 01.37.01; checked 19 November 2026.