One enduro platform, two engine routes
Triumph’s current MY27 enduro range pairs the TF 250-E and TF 450-E. Both are competition-focused four-strokes, but the smaller motorcycle uses a 249.9cc double-overhead-cam engine while the 449.9cc model uses a single-overhead-cam layout.
The output gap defines the main choice
Triumph lists the 250 at 42.3 PS and 27.8Nm, with a 12,800rpm maximum, while the 450 is rated at 58.6 PS and 49.3Nm. Those manufacturer figures describe two different power bands; they do not turn either capacity into the universal choice for every rider or course.
The chassis foundation stays closely matched
Both models use an aluminium spine-and-double-cradle frame, a 21-inch front wheel, an 18-inch rear wheel and a 955mm seat height. The shared suspension package combines a fully adjustable 48mm KYB coil-spring fork with 300mm travel and a KYB rear shock with high- and low-speed compression adjustment.
Electronics are not reserved for the 450
Traction control, launch control, a quickshifter and two Athena-managed engine maps are standard on both motorcycles. Triumph says the maps can be changed while riding, with one aimed at aggressive response and the other at smoother delivery in technical ground. Additional mapping requires the optional Wi-Fi module and MX Tune Pro app.
Gearing keeps a capacity-specific detail
Each motorcycle has a six-speed gearbox and hydraulic wet multi-plate clutch. Triumph specifies 13/52 final gearing for the TF 250-E and 13/51 for the TF 450-E. Brembo brakes, Galfer discs, D.I.D DirtStar wheels, Michelin Enduro 2 tyres and an 8.3-litre tank complete the common specification.
Facts are frozen to the verification date shown above. Any later correction will be added visibly.
Primary source checked internally: Triumph Motorcycles official MY27 TF 250-E and TF 450-E model pages and current enduro specifications, checked 14 November 2026.




