FACT-CHECKEDWritten in-house from a primary official source. No copied article and no outbound detour.

The model names bracket two precise capacities

Sherco lists the 2027 450 SEF Factory at 449.40cc and the 500 SEF Factory at 478.22cc. The larger badge therefore identifies the range position rather than a literal 500cc cylinder. Both figures are manufacturer specifications, not estimates from the model names.

The capacity change comes from bore, not stroke

Both four-stroke singles use a 63.40mm stroke. Sherco pairs that with a 95mm bore in the 450 and a 98mm bore in the 500. The three-millimetre increase creates a 28.82cc capacity difference while leaving the published stroke unchanged.

Most of the surrounding platform is shared

Each model uses a liquid-cooled DOHC four-valve engine, Vitesco electronic injection, electric start, a six-speed transmission, a Brembo hydraulic multi-disc clutch and a complete Akrapovič exhaust. Sherco also publishes the same 9.8-litre tank, chrome-molybdenum semi-perimeter frame, 1465mm wheelbase, 355mm ground clearance and 950mm seat height for both.

The 2027 equipment update follows the same theme

Sherco lists new graphics, a Skyrich 12V 140A lithium battery and a seat with less aggressive grip on both motorcycles. KYB closed-cartridge forks and a KYB rear shock remain part of the Factory specification, with 300mm front travel and 330mm rear-wheel travel.

What the specifications do not prove

The official pages do not publish comparable power or torque figures, so this briefing does not invent a performance gap or describe one bike as universally faster. Bore, displacement and shared equipment are confirmed; throttle feel, traction and rider preference require riding the motorcycles under the same conditions.

Editorial note
Facts are frozen to the verification date shown above. Any later correction will be added visibly.
Primary source checked internally: Sherco official 2027 450 SEF Factory and 500 SEF Factory model specifications; checked 16 November 2026.