FACT-CHECKEDWritten in-house from a primary official source. No copied article and no outbound detour.

The smallest Sherco enduro stays deliberately mechanical

Sherco’s 2027 125 SE Factory uses a 124.81cc liquid-cooled two-stroke with a Keihin PWK 36 carburettor and 2% premix lubrication. It combines that traditional fuelling layout with an electric starter and a digitally advanced DC-CDI ignition.

The 2027 work focuses inside the transmission

Sherco lists a lightened gearbox as a model-year change, intended to reduce the sensation of inertia and improve low-rpm response. Shift-fork shafts are now mounted on springs, which the manufacturer says produces smoother gear changes.

Full-size enduro chassis hardware remains

The steel semi-perimeter chassis carries a 48mm KYB closed-cartridge fork with 300mm travel and a KYB rear shock providing 330mm of rear-wheel travel. Brembo hydraulic brakes use 260mm and 220mm discs, while the fuel tank holds 10 litres.

The specification defines the bike, not a result

Sherco lists a 950mm seat height, 355mm ground clearance and 1,465mm wheelbase. The official page confirms the components and 2027 changes but publishes no weight or performance claim, so neither is added here.

Editorial note
Facts are frozen to the verification date shown above. Any later correction will be added visibly.
Primary source checked internally: Sherco official 125 SE Factory 2027 model page and technical specification; checked 18 November 2026.