The 2027 model is a ground-up 450 update
Honda describes the 2027 CRF450R as its biggest overhaul of the model in a decade. The official European press kit centres the change on a new 449.5cc engine, a more compact transmission and clutch package, and an aluminium frame that is 70% redesigned.
Honda publishes two measured engine gains
The manufacturer states that the new engine produces 10.3% more power and 3.7% more torque. A 97mm bore, 60.83mm stroke and 13.75:1 compression ratio accompany larger inlet and exhaust valves, a new piston and a new crankshaft. Those percentage gains are Honda’s own specification claims, not an independent dyno result.
The chassis brief targets traction and control
Honda pairs the revised twin-tube frame with a longer aluminium subframe, new swingarm and reworked Showa suspension. The production specification lists a 49mm upside-down fork, a 50mm Pro-Link rear shock, 333mm ground clearance and 108kg kerb weight.
The electronics retain three rider choices
Honda Selectable Torque Control offers three intervention modes, while the updated HRC Launch Control also provides three settings. Engine Mode Select completes the rider-adjustable package. The official description links the systems to traction, starts and engine character; this briefing does not turn those claims into a test verdict.
This is a verified specification explainer
No fresh official race or transfer item cleared the newsroom’s duplication check for this slot, so Euro MX Community used the permitted evergreen route. Every figure above comes from Honda Motor Europe’s 2027 model material, checked on 20 November 2026, and the accompanying visual is an original branded text-card rather than manufacturer or race photography.
Facts are frozen to the verification date shown above. Any later correction will be added visibly.
Primary source checked internally: Honda Motor Europe official 27YM CRF450R press kit and Honda UK official 2027 CRF450R product specification, issued 28 May and checked 20 November 2026.




