FACT-CHECKEDWritten in-house from a primary official source. No copied article and no outbound detour.

The badge covers exactly 124.8cc

Betamotor specifies the 2027 RR X-Pro 2T 125 at 124.8cc, produced by a 54mm bore and 54.5mm stroke. It is a liquid-cooled single-cylinder two-stroke with a six-speed transmission, placing the model at the smallest end of the RR X-Pro family.

Fuel and starting stay deliberately mechanical

The official specification lists reed-valve induction, a Keihin PWK 36 carburettor, premix lubrication and a kickstarter. Those are confirmed components; Beta does not list electronic fuel injection, separate oil injection or electric start for this model, so this briefing does not imply them.

The exhaust valve and maps still give two adjustments

Beta retains its adjustable BPV exhaust-valve system and fits a handlebar map switch with Standard and Soft settings. The exhaust valve can be calibrated externally, while the map switch changes the available engine character without turning the carburetted 125 into an electronically injected motorcycle.

The chassis numbers define the compact package

Beta publishes a 930mm seat height, 1,477mm wheelbase and 94kg dry weight, split as 45kg at the front and 49kg at the rear. Fuel capacity is 9.5 litres, with a stated 2.3-litre reserve. These are manufacturer figures rather than independent measurements.

MY27 changes focus on control and durability

For 2027, Beta lists a model-specific piston, revised SHC fork setting, tool-free rear compression adjustment, a smaller Nissin front caliper, LED headlight, Trailtech dashboard and reinforced chain guide. The specification explains what changed; real-world performance still depends on setup, terrain and rider.

Editorial note
Facts are frozen to the verification date shown above. Any later correction will be added visibly.
Primary source checked internally: Betamotor official RR X-Pro 2T 125 MY27 model page and technical specifications; checked 17 November 2026.